POWER GRID MONITORING

UAV Monitoring of power grids

A revolutionary approach to power line maintenance using advanced unmanned technologies.

Inspection technologies:
Thermal imaging control
Detection of contact overheating, insulator defects, partial discharges
LiDAR Scanning
3D modeling of power lines, measuring wire sag, detecting vegetation
4K/8K Visual inspection
Detailed inspection with optical zoom, detection of mechanical damage
Live monitoring
Real-time thermal imaging control of power lines
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_oWRlBAmm.png
500 kV
Live workin
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_L63gfLyD.png
1 mm
Detection accuracy
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_Mni640j8.png
х30
Optical zoom
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_nqwDqwjK.png

Key capabilities

  • Defect detection down to 1 mm
  • Distance of 5-30 m from wires
  • Automated flight routes
  • Operation without power shutdown
  • Night inspection
  • Georeferencing of defects
HEAT NETWORK MONITORING

Monitoring of heating networks and heating mains

icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_nqwDqwjK.png

Detectable defects


  • Coolant leaks
  • Heat loss
  • Filling with water
  • Insulation damage
  • Illegal tapping
  • Structural damage
Combining thermal and visual images for accurate diagnostics of heating network condition

Monitoring process

Route planning. Uploading an electronic map of the heating mains into the UAV's memory
Night flight. Conducted at night or before dawn for maximum contrast
Shooting every 3 seconds. The drone moves at 9 km/h, recording temperature
Analysis and report within 12 hours. Creating a thermal map with anomalies identified
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_PLJxuAX3.png
70-200
meters
Flight altitude
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_Mni640j8.png
1000
images
Per section
icon - /uploads/s/v/6/k/v6krxuxti5aj/img/full_9Gm5NgxB.png
500
kV
20 km of line surveyed
KEY BENEFITS

Advantages of unmanned monitoring

Importance


Accident prevention
Early detection of defects before critical failures

Uninterrupted supply
Ensuring stable operation of power and heating networks

Preventive maintenance
Shifting from emergency repairs to prevention

up to 80%
reduction in accident rates

Speed


8‑10 times faster
Compared to ground‑based inspection methods

10 km of power lines in 1‑2 hours
Instead of 2‑3 days with traditional methods

Report within 12 hours
Fast delivery of thermal maps

up to 90%
time savings

Cost‑effectiveness


Up to 40% savings
Reduction in operational maintenance costs

Lower repair expenses
Preventing costly emergency work

Reduced heat loss
10‑30% heating savings by eliminating leaks

< 1 year
ROI on implementation

Safety


Risk elimination
No need to put personnel at height

Operation without shutdown
Live inspection up to 500 kV

Access to hard‑to‑reach areas
Swamps, forests, mountains

0
workers in the danger zone
Leave a request
If you are interested in our services, leave a request for a consultation. We welcome new partners and clients.